French Terry vs. Sweatshirt Fabric — Differences That Matter

French terry and sweatshirt fabric are often used interchangeably — but they are two different fabrics with distinct constructions, properties, and production uses. Knowing the difference helps you make better purchasing decisions and avoid costly mistakes that waste time and money. Here is the precise overview you need.

What is French Terry — and what is it not?

French terry is a single jersey knit fabric with a smooth outer side and unstructured loops on the reverse. It is not the same as sweatshirt fleece, nor is it french terry in the bath towel sense. The loops on the reverse provide breathability and some insulation, while the outer side is clean and suitable for printing and embroidery.

Sweatshirt fabric — also called fleece-back sweatshirt or brushed sweatshirt — on the other hand, has a brushed, soft inner side. The brushed surface is created by mechanically treating the loops to open them up and form a flat, soft surface. This is the fabric most associate with classic sweatshirts and hoodies with a warm, soft interior.

In short: french terry has loops on the reverse. Sweatshirt fabric has brushed loops. It sounds like a small detail — but it has a big impact on your production and your customers’ experience of the finished product.

Construction and weight — what the numbers say

At Jydsk Stoflager, we supply french terry fabric weighing 235–240 g/m² with a width of 160 cm and a composition of 95% cotton + 5% lycra. The wide fabric width is a clear advantage in production — you get more out of each meter and reduce waste during cutting.

The weight of 235–240 g/m² places french terry at the heavier end of the jersey fabric segment. This provides dimensional stability and good drape, suitable for sportswear, loungewear, and casual clothing. Compare it to a standard cotton jersey fabric at 200 or 220 g/m², and you will clearly feel the difference in handling during sewing.

Sweatshirt fabric typically varies in weight depending on supplier and brushing level. This is exactly one of the areas you should pay attention to when purchasing: two fabrics can weigh the same but still feel and behave very differently depending on whether the reverse is looped or brushed.

Production use — when to choose what?

It’s not a question of which is best — it’s about what fits your production and your customers’ needs. Here are the key considerations:

• French terry is suitable for sportswear, jogging pants, sweatshirts for mild temperatures, baby and children’s clothing, as well as loungewear. The smooth outer side takes digital print well and gives a clean look. The loops on the reverse absorb moisture without sticking.
• Brushed sweatshirt fabric is better suited for winter sweatshirts, hoodies, and garments where softness against the skin is a primary selling point. The brushed inner side is warmer and provides a more traditional sweatshirt feel.
• For printing and embroidery, french terry is clearly preferred — the smooth outer side delivers sharper results and more consistent color reproduction than a brushed surface.
• For children’s clothing, french terry is popular because the combination of soft loops and smooth outer side is skin-friendly and practical for washing.

If your customers mainly sell casual and active wear, french terry is the most flexible choice. It covers a wide price range and can be used for both basic and premium products depending on finish and print.

Sewing practical differences — what to prepare production for

French terry and sweatshirt fabric do not impose the same requirements on your production. Here are the concrete differences you should know:

• Prewash: Both fabric types should be prewashed before cutting to minimize shrinkage. French terry with a high cotton content can shrink 5–8% on first wash — factor this into your consumption per piece.
• Needle type and seam: Both fabric types are sewn with stretch stitches or overlock. French terry’s loops on the reverse require even feeding to avoid pulling loops into the seam.
• Crosswise elasticity: 5% lycra ensures good crosswise stretch in both fabric types. This means the construction must account for stretch in the cutting direction — especially important for tight-fitting models.
• Edge and finishing: French terry is often used with rib knit trims at neck, sleeves, and waist. Use french terry consistently throughout the collection and combine with matching rib knit for a professional look.
• Pressing: French terry can be pressed on the reverse without problems. Avoid high heat directly on the loops — it can negatively affect the structure.

Digital printing on french terry — an exclusive advantage

One of the clear advantages of french terry fabric is the smooth outer side, which makes it suitable for digital printing. At Jydsk Stoflager, our digital prints are AI-designed and manually refined in Photoshop — you won’t find the same designs elsewhere. This allows you to offer your customers something exclusive that stands out from standard ranges.

Our digital prints deliver consistent color reproduction from roll to roll — a crucial requirement when producing seasonal collections and needing to match fabric across orders. This is not something you can take for granted with all suppliers.

The majority of our digital prints on cotton jersey fabric are GOTS certified. French terry is Oeko-Tex 100 certified. Both certifications are documentation your customers increasingly demand — and provide you with a concrete sales argument.

Purchasing and inventory management — practical considerations

The minimum order at Jydsk Stoflager is 10 meters regardless of fabric type. This makes it possible to test french terry in a new collection without tying up large amounts of capital in stock before you know the sales potential.

We ship to all of Europe with delivery in 1–3 business days — primarily Denmark, Sweden, Norway, Finland, Estonia, Lithuania, and Latvia. All our fabrics are stock items ready for dispatch, so you can plan your production without long lead times. This is a concrete advantage when delivery times from other suppliers are unpredictable.

If you consider supplementing with other fabric types for your collection, you will also find our full range of jogging and french terry fabrics gathered in one place, so you can coordinate purchasing efficiently.

Conclusion — choose with understanding of the material

French terry and sweatshirt fabric do not solve the same task. French terry is the more versatile choice — easier to print on, skin-friendly, and suitable for a wide range of garment types. Brushed sweatshirt fabric delivers more warmth and the classic sweatshirt feel but is more specialized in its use.

Knowing the differences and communicating them to your customers strengthens your advisory position and reduces complaints. That is good business — whether you are a fabric shop, clothing manufacturer, or buyer.

See our current stock of french terry fabric and order wholesale directly. Delivery 1–3 business days. Minimum order 10 meters.

Frequently Asked Questions

Is french terry the same as french terry?
No. French terry is a single jersey knit fabric with loops on the reverse — not a french terry structure like towels. The outer side is smooth and suitable for printing and sewing on par with other jersey fabric types.

Can french terry be used for children’s clothing?
Yes. French terry is suitable for children’s clothing — the combination of smooth outer side and soft loops on the reverse is skin-friendly, and 95% cotton provides good breathability. Our french terry is Oeko-Tex 100 certified.

What is the minimum order for french terry at Jydsk Stoflager?
The minimum order is 10 meters — applies to all fabric types. This gives you the opportunity to test new qualities in limited quantities before scaling up production.